MAG: HOW TO BYPASS INFOMIR'S BLOCKING OF YOUR SUBSCRIPTION
How to Bypass Infomir Blocking on Your MAG Subscription?
MAGs lose portal settings after updating, preventing users from adding portal addresses.
👉 Is Your IPTV Blocked? Restore Access Immediately with These Solutions!
Why Is Your MAG Blocked and How to Unblock It?
If your device is blocked by Infomir and can no longer receive IPTV channels, you can:
✔ Downgrade the system software to restore access.
✔ Install an image file via USB to restore your IPTV channels.
⚠ Important: Disable automatic update to avoid this problem in the future!
👉 Need a stable and reliable IPTV subscription? Click here to order
Devices Blocked by Infomir (MAG 250-324)
If your MAG device is blocked, use the noblock image files below to restore access to IPTV channels.
📥 Download the image file corresponding to your MAG model and copy it to a USB stick (capacity less than 16 GB and formatted in FAT32).
👉 Don't let Infomir block you! Order a 100% functional IPTV subscription here
Install the Image File on a MAG
Preparation on PC (USB Stick):
1️⃣ Download the imageupdate file corresponding to your model.
2️⃣ Create a folder at the root of the USB stick with the name of your MAG model (e.g., "mag250").
3️⃣ Copy the imageupdate file into this folder.
⚠ Do not turn off the decoder or remove the USB stick during the update.
👉 Is your IPTV still blocked? Discover a reliable solution here
Installation on the MAG 250-254
1️⃣ Plug the USB stick into the decoder.
2️⃣ Open the system settings and go to software update.
3️⃣ Select Update method = USB.
4️⃣ Check if the imageupdate file is detected and then start the update.
5️⃣ Wait for the update to complete (the progress bar will indicate the status).
6️⃣ The STB will automatically reboot once the update is complete.
👉 Need a fast and seamless IPTV subscription? Click here to get yours
Installation on MAG 322-324
1️⃣ Plug the USB stick into the MAG USB port.
2️⃣ Go to Settings → System → Software Update.
3️⃣ Choose Update method = USB and check the imageupdate file.
4️⃣ Press Update (F1) to start the update.
5️⃣ Wait for the process to finish and let the MAG reboot automatically.
👉 Need a quality IPTV subscription? Order here
Downgrade a Stuck MAG 322
If your device is stuck and you need to downgrade the software, use this file:
📥 MAG322 Downgrade 👉 Download
Downgrade Steps:
1️⃣ Download the imageupdate file and copy it to a USB drive by creating a folder named "mag322".
2️⃣ Plug the USB drive into the STB.
3️⃣ Open the system recovery menu:
- Turn off the STB.
- Hold down the Menu button on the remote control.
- Turn on the STB again while holding the Menu button.
-
The system recovery menu will appear after 10 seconds.
4️⃣ Follow the path:
Upgrade Tools → Software Update → USB → Yes.
5️⃣ Wait for the update to finish and let the STB restart automatically.
👉 Is your IPTV still blocked? Order a new quick installation here
Conclusion
If your MAG device is blocked and can no longer receive IPTV channels, this guide helps you regain access by installing an image file or downgrading the software.
⚠ Always disable automatic update to avoid being blocked in the future.
🚀 Take back control of your IPTV now! Get a secure IPTV subscription here